These are a direct replacement for the standard bottom arms and will add 1 1/2º of negative camber to whatever the car has as standard – quoted by the manufacturers as being 1º positive, ±1º.

If the car has 1º positive, fitting the negative camber arms will give 1/2º camber. Measuring what the car has with standard arms will help determine what camber setting will be achieved by using C-AJJ3364.

Negative camber helps reduce under steer, thus improving the car’s cornering performance. Altering the car’s ride height also alters the camber angle and so needs setting before considering the fitment of C-AJJ3364 – lowering the car adds negative camber, raising it adds positive camber.

Excessive negative camber will increase tyre wear on the inner edge. A maximum of 1 1/2º negative is suggested for road use. NOTE: Increasing negative camber by lowering the car will also increase the camber angle.

IMPORTANT WARNING If the kit you have purchased has the letter A or B suffix, or is paint coded blue or white, the following applies: C-AJJ3364 with the suffix A are 2º extra negative camber (blue). C-AJJ3364 with the suffix B are 21/2º extra negative camber (white). These are for race or special requirements to be fitted only by professionals.