For use when converting cars which already have hubs fitted that hold calipers except 997/998 Cooper which will also require larger Constant velocity joints and Timken bearings, If you have brake shoe front drum brakes a kit C-AJJ4029A is available which contains all parts required..

The contents of this kit are;
1 1pr Vented brake discs GBD496ms
2 2 Drive flanges NAM6450F
3 8 flange to disc bolts SH110201M
4 1pr 4 pot turbo type cast calipers GBC2030/1
5 set of brake pads GBP258KEVLAR
6 brake pad pin set GBK1025
7 C-AJJ4024 Braided front brake hose set

There have been various brake line systems used on the mini with many rear wheel cylinder applications.
We advise the following guideline as to the best configuration to maintain correct brake Bias between front and rear.
If a regulator valve is fitted use 0.75 bore size, part no GWC1102
If no valve is fitted or valve discarded use 0.565 bore size GWC1131

If in doubt refer to AKM2 catalogue where all cylinder sizes, casting and part numbers are listed (GWC1102 is the most common from 1980 on except any diagonal split or Export versions.