![Mini Cooper ELECTRICS SHIELD COVER](/image.axd?type=product&picture=350/BHM1675.jpg)
BHM1675 - Fitting Instructions - ELECTRICS SHIELD COVER
This large plastic shield was Rovers last attempt to cover the engine electrics on all minis except for MPI cars 1996 on. It might need slight modifications by narrowing for some SPI cars but they have been fitted to many cars without any problems.
Kit contains
1 Shield - NJT10004
3 Plastic clips - 13H6461
2 Upper bracket - NJU10002
1 Lower bracket - JZV1073
The 2 upper brackets fit on the rocker cover retaining nuts and the lower bracket fits under the lip on the top of the gearbox, where it bolts to the engine with the square fastener hole towards the oil filter side. You will have to remove two of the gearbox to engine bolts. Start with the middle bolt first (there are 5 bolts) so you can see where the bracket needs to fit, and the bolt to the left, nearer to the starter motor is the other bolt that requires removal.
Download a printable PDF of this fitting instruction here
BHM1675.pdf
see BHM1675 details