Label	Part No	Description	Quantity	Comments
1	NAM7162	Radius arm bushed assembly R/H less No.5	1
1	NAM7162KIT	Radius arm bushed assembly R/H with No.5 repair kit	1
1	TRA33	Reconditioned radius arm R/H with kit No.5 fitted	1	Old unit required
1	NAM7163	Radius arm bushed assembly L/H less No.5	1
1	NAM7163KIT	Radius arm bushed assembly L/H with No.5 repair kit	1
1	TRA32	Reconditioned radius arm L/H with kit No.5 fitted	1	Old unit required
2	21A397	Brake pipe bracket	2	N.L.A
3	2A7351	Stub axle shaft R/H	1
3	2A7364	Stub axle shaft L/H	1
4	2A7352	Circlip for stub axle	2
5	GSV1125	Radius arm repair kit (single arm only)	2
6	ACA9099	Shaft for radius arm	2	All these parts are supplied in kit GSV1125 and note the outer bush requires reaming to correct size after fitment
7	2A7327	Rubber sealing ring	4	All these parts are supplied in kit GSV1125 and note the outer bush requires reaming to correct size after fitment
8	2A7324	Outer thrust washer	2	All these parts are supplied in kit GSV1125 and note the outer bush requires reaming to correct size after fitment
9	ACA9302	Inner thrust washer	2	All these parts are supplied in kit GSV1125 and note the outer bush requires reaming to correct size after fitment
10	2A7325	Bronze bush outer	2	All these parts are supplied in kit GSV1125 and note the outer bush requires reaming to correct size after fitment
11	GFK3215	Plain nut 1/2” UNF	4	All these parts are supplied in kit GSV1125 and note the outer bush requires reaming to correct size after fitment
12	LN10051	Grease nipple straight, was UHN400	2	All these parts are supplied in kit GSV1125 and note the outer bush requires reaming to correct size after fitment
13	RLH10021	Hub rear less wheel studs	2
14	21A1278	Wheel stud, 55mm stud shaft length with 20mm thread	8
14	ENJO-1039	Wheel stud, 58mm stud shaft length with 19mm thread	8	In CW15/CW16 kit
14	ENJO-1040	Wheel stud, 78mm stud shaft length with 27mm thread	8	In CW17 kit
15	113087	Wheel nut, with 60 degree seat angle for steel wheels	16	Original equipment
15	CN5	Wheel Chrome nut, with 60 degree seat angle	16	Aftermarket fitting
15	AJM1139	Wheel nut, for alloy wheels less stainless steel cover	16	Original equipment
15	NAM9075	Wheel nut, for alloy wheels with stainless steel cover	16	Original equipment
16	GHK1548	Rear hub tapered bearing kit less ‘O’ ring CDU1173 (number 19)	2	Use GHK1805
16	GHK1548MS	Rear hub tapered bearing kit non genuine	2
16	GHK1805	Rear hub tapered upgraded bearing kit with O ring CDU1173	2
17	GHS102	Oil seal	2
18	GHF511	Split pin for stub axle shaft/nut	2
19	CDU1173	‘O’ ring for stub axle inner. Fitted from 1996 only	2	Part of GHK1805
20	BTA672	Washer for rear hub nut	2
21	NL610041	Castle nut R/H with right hand thread	1
22	FNN2410	Castle nut L/H with left handed thread	1
23	ATB4098	Grease retaining cap	2
24	SR4	Spacer for rear wheel 1/8” (5mm) without studs	1pr	Rover used 8mm so use SR3&SR4 combined
24	SR3	Spacer for rear wheel 3/16” (3mm) without studs	1pr	Rover used 8mm so use SR3&SR4 combined
24	CW17	Spacer kit for rear wheel 3/4” (19mm) with studs	1	Special fitment only

Safety Critical Notice: When fitting wheel spacers ensure they are the correct specification for your vehicle not causing undue loading on any components.

Note: No16. GHK1805  had improved tapper bearing rollers for use on 13” wheels as a Rover warranty bulletin upgrade with an ‘O’ ring for the stud shaft to prevent water penetration. Radius arms were machined with a recess for the 'O' ring from 1996 on.