Some Safari browsers are failing to connect secured pages Try the following: - refresh the page a few time to see if the page loads, if this fails please update the browser or try to browse the page in Firefox or Chrome. - Read more.
Minispares.com uses cookies to give a better browsing experience. Read more 
TOOL11

TRACKRITE TRACKING GAUGE

Simple and accurate tool for checking the wheel tracking-this tool is essential when suspension modifications or upgrades are carried out. A completely flat and level floor is not neccessary. Should also be used in conjunction with TOOL10 geometry tool.



Trakrite is the simplest, most accurate device for checking the alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.



Additional Information

• Tests accuracy in only 5 minutes.

• Easy and simple to operate with no technical knowledge needed.

• Easy to follow instructions.
  • Was £83.31 exc vat
  • Was £99.97 inc vat
  •  
  • Now £70.81 exc vat
  • Now £84.97 inc vat

 In stock

 
help Recommended usage 1 x TOOL11 to fit one mini.
 
  • share
Also see:
 

People also bought

Showing 1 to 0 of 0 products
STAINLESS STEEL DRIP TRAY
TOOL32   More Details


Was £14.85
(inc VAT) £17.82

IMPERIAL/METRIC OFFSET FEELER GAUGE SET
TOOL30   More Details


Was £9.41
(inc VAT) £11.29

AF/IMPERIAL & METRIC COMBINATION SPANNER SET ......
TOOL31   More Details


Was £41.34
(inc VAT) £49.61

FLYWHEEL LOCKING TOOL
TOOL25   More Details


Was £19.50
(inc VAT) £23.40

RED RUBBER GREASE 500g
DEP74500   More Details


Was £13.50
(inc VAT) £16.20

CASTROL CLASSIC OIL PUMP CAN
J106   More Details


Was £9.69
(inc VAT) £11.63

OIL FILTER WRENCH
TOOL09   More Details


Was £26.10
(inc VAT) £31.32

1/2" HEX KEY SOCKET FOR CRANK BOLT
TOOL22   More Details


Was £3.00
(inc VAT) £3.60

COPPER GREASE high melting point 500g
DEP73500   More Details


Was £13.13
(inc VAT) £15.76

SPECIAL WASHER FOR SEATING CV AND WHEEL BEARI......
TOOL21   More Details


Was £4.50
(inc VAT) £5.40

A SERIES CRANKSHAFT TAP 5/8" X 16 TPI WHITWOR......
TOOL20   More Details


Was £30.00
(inc VAT) £36.00

SPARK PLUG SOCKET 21MM
TOOL18   More Details


Was £3.60
(inc VAT) £4.32

GEARBOX SELECTOR ROLL PIN PUNCH TOOL
TOOL17   More Details


Was £2.50
(inc VAT) £3.00

MOLY GREASE (SUITABLE FOR CV JOINTS) 500g
DEP72500   More Details


Was £6.30
(inc VAT) £7.56

OIL 20W50 SEMI SYNTHETIC OIL - 5 Litre CTV
MILLERS002   More Details


Was £35.25
(inc VAT) £42.30

SUSPENSION CONE COMPRESSOR TOOL METRIC THREAD......
TOOL07   More Details


Was £26.65
(inc VAT) £31.98

CARB BALANCER TOOL
MSA1003   More Details


Was £28.50
(inc VAT) £34.20

CARB SU ADJUSTING SPANNER
CA39   More Details


Was £5.48
(inc VAT) £6.58

REAR WHEEL CYLINDER CIRCLIP TOOL
TOOL14   More Details


Was £9.45
(inc VAT) £11.34

FLYWHEEL BOLT SOCKET 30MM IMPACT A+
TOOL13   More Details


Was £7.74
(inc VAT) £9.29

Fitting instructions / Articles

MS73 - ADJUSTABLE REAR TRACK AND CAMBER BRACKETS FITTING INSTRUCTIONS.


To facilitate full experimentation in this area, the MS73 kit has been developed to allow accurate adjustment of rear wheel camber AND track. Adjustment of rear track can greatly influence the handling characteristics of the Mini. For reference, toe in gives straight-line performance/stability with more rear end grip (under-steer). Toe-out gives over-steer in corners, and less stability in a straight line - particularly under part/closed throttle conditions. Simple and effective caster/camber and tracking gauges are available from Mini Spares (Tool10 caster/camber gauge, TOOL11 tracking gauge) to facilitate DIY setting of geometry.

SUSPENSION - Basic Priorities


Suspension - Basic priorities for improved suspension performance. Having studied the 'Suspension - Terminology' article you should now have a ‘job description’ understanding of previously possibly un-comprehended words associated with suspension control. Now - what to do with it? The first thing we need to establish is an order of priority before distributing hard-earned 'beer vouchers' in all directions. Fortunately, this is a good deal less complicated than is generally believed. Despite the five main factors that control the front suspension geometry – kingpin inclination, caster angle, camber angle, track, and bump-steer – we are only really able to alter three of those easily. King-pin inclination is non-adjustable, as it’s a feature of where the swivel-pins are mounted on the hub at the factory. It will alter as other adjustments are made, but we can do nothing easily about correcting/optimising it independently, as these are fixed in position on the swivel hub.

C-AJJ3360 - ON-CAR ADJUSTABLE ONE-PIECE FORGED BOTTOM ARM


Mini Spares has now further improved it's quality one-piece forged adjustable bottom front suspension arm to be on-car adjustable and accept all types of non-rod-end (Rose joint) bushings by including a purpose-forged trunnion.

Safety critical, the one-piece forging is of the highest quality; far stronger and with ultimate integrity compared with the now-ancient method of cutting/welding on of adaptors – a process that demands the most specialised equipment and skill to be sure of component integrity. Manufactured from a new forge tool, the bottom arm inner joint boss has been extended to accept a tube-nut adjuster that accepts the purpose-forged trunnion.

The tube nut allows easy adjustment of camber without needing to jack the car up and disassemble the suspension; the trunnion giving all Mini owners an option previously only available to racers – the capability of having fully adjustable suspension without the need to use spherical rod-ends. The trunnion will take any of ...

SUSPENSION - Basic set-up method


Time to arrange all those agonised over, carefully selected and applied suspension components to give of their best.

Suspension - Basic set-up method

part numbers: TOOL10, TOOL11, HILO, HILO-01

Time to arrange all those agonised over, carefully selected and applied suspension components to give of their best.

This is one of those subjects viewed as a ‘black art’, largely because of lack of understanding and confusion. The confusion part is because folk encompass the whole suspension set-up deal with suspension arrangement and design, lack of understanding instilling terror at the thought of ‘fiddling’ with the suspension components. The latter also fuelled by the knowledge that expensive specialist measuring equipment is needed. Well, there is no black art – you can work the magic. More a case of a long day’s labour made...