Some Safari browsers are failing to connect secured pages Try the following: - refresh the page a few time to see if the page loads, if this fails please update the browser or try to browse the page in Firefox or Chrome. - Read more.
Minispares.com uses cookies to give a better browsing experience. Read more 
C-AEG620

ULTRALIGHT STEEL FLYWHEEL PRE-ENGAGED STARTER

Ultra light billet EN8 steel race flywheelfor diaphragm clutch [NOT Verto] with ring gear for pre-engaged starter.

The latest refinement of the Ultra-light Mini flywheel is that it is now made symmetrically to reduce harmonics vibrations caused by earlier versions identified by their large 3 slots, rather than the current 6 smaller slots- yet it still weighs just over 3.66kg (8.07lbs). This is considerably lighter than a safely lightened standard iron flywheel, and also provides a much hardier clutch surface..



Not recommended for road use. (See C-AEG420)
  • Was £141.71 exc vat
  • Was £170.05 inc vat
  •  
  • Now £127.54 exc vat
  • Now £153.05 inc vat

 In stock

 
help Recommended usage 1 x C-AEG620 to fit one mini.
 
  • share
 

Recommended products

Showing 1 to 0 of 0 products
CLUTCH FLYWHEEL DRIVE STRAP
2A3658   More Details


Was £3.31
(inc VAT) £3.97

CLUTCH BOLT LONG COVER TO PRESSURE torque to ......
2A3657   More Details


Was £2.09
(inc VAT) £2.51

CLUTCH FLYWHEEL STRAP BOLT SHORT-torque to 16......
2A3659   More Details


Was £1.85
(inc VAT) £2.22

CLUTCH OIL SEAL MINISPARES PERFORMANCE USE TY......
13H2934MS   More Details


Was £3.55
(inc VAT) £4.26

 

This kit contains

Showing 1 to 0 of 0 products
STARTER MOTOR RING GEAR 129T VERTO PRE-ENG
PSF10003   More Details


Was £23.83
(inc VAT) £28.60

 

People also bought

Showing 1 to 0 of 0 products
EN24T PRE VERTO FLYWHEEL BOLT AND KEYWAY
22A747EVO   More Details


Was £33.79
(inc VAT) £40.55

CLUTCH RETURN SPRING ANCHOR FOR MINISPARES LE......
2A3601MS   More Details


Was £4.28
(inc VAT) £5.14

CLUTCH LEVER ARM AND PLUNGER RACE KIT PRE VER......
C-22A2204   More Details


Was £81.50
(inc VAT) £97.80

CLUTCH FLYWHEEL BOLT. SHORT RACE USE-SOLD SIN......
C-2A3659   More Details


Was £3.08
(inc VAT) £3.70

CLUTCH BOLT LONG COVER TO PRESSURE. RACE USE ......
C-2A3657   More Details


Was £3.15
(inc VAT) £3.78

CLUTCH RELEASE BEARING-HEAVY DUTY PRE VERTO
GRB201EVO   More Details


Was £12.00
(inc VAT) £14.40

SLAVE CYLINDER RETURN SPRING ANCHOR TAB
2A3600   More Details


Was £2.25
(inc VAT) £2.70

CLUTCH PLUNGER UPRATED PRE VERTO MADE IN EN24
22A180   More Details


Was £17.60
(inc VAT) £21.12

CLUTCH PLATE 4 BLADE PADDLE PLATE 180mm
C-AHT599   More Details


Was £248.31
(inc VAT) £297.97

CLUTCH PLATE ROAD/RALLY PERFORMANCE 180mm
C-AHT595   More Details


Was £53.31
(inc VAT) £63.97

CLUTCH PLATE VERTO PERFORMANCE PLATE 190mm WI......
C-AHT594   More Details


Was £169.02
(inc VAT) £202.82

PRE-VERTO CLUTCH PLATE
GCP204AF   More Details


Was £34.50
(inc VAT) £41.40

CLUTCH HOSE BRAIDED PRE VERTO
C-AJJ4025   More Details


Was £15.41
(inc VAT) £18.49

CLUTCH HOSE BRAIDED ONE PIECE. CLUTCH MASTER ......
C-AJJ4025COMP   More Details


Was £23.19
(inc VAT) £27.83

CLUTCH DIAPHRAGM STANDARD ALL MINIS UP TO 70F......
GCC103   More Details


Was £36.00
(inc VAT) £43.20

FLYWHEEL BOLT PRE VERTO
22A747   More Details


Was £8.74
(inc VAT) £10.49

CLUTCH FLYWHEEL STRAP BOLT SHORT-torque to 16......
2A3659   More Details


Was £1.85
(inc VAT) £2.22

AP SINTERED CLUTCH PLATE HEAVY DUTY RACE
C-AHT598   More Details


Was £354.75
(inc VAT) £425.70

PRESSURE PLATE FOR DIAPHRAGM CLUTCH steel TYP......
22A598   More Details


Was £99.00
(inc VAT) £118.80

PRE VERTO CLUTCH LEVER ARM HEAVY DUTY
22A2204MS   More Details


Was £20.00
(inc VAT) £24.00

Fitting instructions / Articles

Flywheel - Pre-Verto Types


The early spring-type clutch flywheels are of no use except where total originality is required on a concours car. The taper is too small and diaphragm pressure ring non-existent. No use to man nor beast. Part No Applications: C-AEG421, C-AEG420, C-AEG619, C-AEG620, 2A3657, 2A3658, 2A3659, 2A3512 With the exception of the fact the two-piece flywheel is two pieces bolted together - this and the later one-piece cast item can be treated as the same thing. They will universally fit all transverse engine cranks from 1964 onwards, so that should be easy enough. If all you can get is the hulking great 1300 type, then this too is as universal to fit, but I highly recommend you get that extra cast lump machined off of the outer edge as a bare minimum. Further lightening of these cast flywheels is possible by having metal machined off of the diaphragm side, from the outer edge of the diaphragm pressure ring outwards.

C-AEG620 Ultra-light steel flywheel (pre-engaged starter type)Fitting instructions


This flywheel is not balanced so should be before use, along with the prospective clutch assembly.

Before fitting the Mini Spares Ultra-light steel flywheel, carefully examine the crankshaft taper for any burrs or other protrusions caused by fret-welding of previous flywheels. All protrusions of any sort must be removed as they will cause incorrect seating of the flywheel which could, in turn, cause this fret-welding to occur and permanently damage both crankshaft and flywheel. A recognised method of ensuring correct fit is to use fine valve lapping paste to lap the flywheel on to the taper.

A good, correct fit will be confirmed by seeing an even grey finish over the whole of the taper on both components. The paste should then be thoroughly washed off using a strong cleaning solvent (such as cellulose thinners or brake cleaner).