Cylinder head - Min Tec head range
I'm often asked about the range of cylinder heads I do for Mini Spares/Mini Mania, so here's the low-down…
Although the following range of heads accommodate specific fitments - like pre-1992 where by-pass hoses and heater take-offs on the clutch end of the head are used and post-1992 where neither of these exist, and on SPi (single point injection) heads where they don't usually have a threaded hole for the temperature sender - in reality it is easy to convert almost any of them to fit any other engine since holes are easily blocked off - or by-pass hoses not used, water pumps blanked off and drilled thermostats fitted (see articles on cooling/engine transplants). A list of which is what and what to do to each to convert is at the end of this article.
For more in-depth descriptions of the head specs, see article 'Cylinder head - About Min Tec Heads' - basically the valve sizes used have been decided on after extensive and in-depth flow test...
Monitoring Radiators development since 1960.
I have been monitoring radiators and their development since the late 1960’s because they were and still can be a problem when tuning cars. I have seen, tried and tested everything made available or offered to Mini Spares
Cylinder head 2022
Get to know your classic mini Cylinder Heads